Updated November 2026
Concrete bunny garden statues can add a playful, storybook quality to flower beds, borders and shady corners. This guide shows you how to pick the right size and style, position the piece so it reads well from the path and the house, and keep it looking good through seasons of rain and frost.
Step 1: Decide on the Style and Scale
Concrete bunnies come in several looks. Seated figures with upright ears suit cottage gardens, while crouching or sculpted “garden guardian” poses fit more structured designs. Match the piece to the scale of your space. A rule of thumb many designers use is that a statue should be about one-third the height of the plant mass behind it. In a small bed, a bunny roughly 10 to 14 inches tall keeps the focus balanced. In a large perennial border, something 18 to 24 inches tall holds its own.
Shopping for one? See our guide: Design Toscano Garden Gnomes Review: Bigfoot Yeti Statue Pros and Cons.
Step 2: Choose the Right Spot
Place the bunny where it will be seen but not overwhelmed. Position it at a bend in a path, at the edge of a lawn, or tucked among low groundcover so it appears to be peeking out. Avoid placing it dead center in a bed where it competes with your key plants. Check the sightline from your main window or patio, since a statue that looks charming up close can disappear from a distance.
Light and Shade
Concrete tolerates both sun and shade, but algae and moss grow faster in damp, shaded areas. In those spots, plan to clean the surface a few times a year. Sun-exposed bunnies may develop surface chalking over time, which is normal and can be brushed off.
Step 3: Set the Statue Securely
Heavy concrete pieces can tip after heavy rain or when a child or pet climbs on them. Use this simple setup:
- Mark the footprint and dig a shallow hole about 2 inches deeper than the statue’s base.
- Add 1 to 2 inches of compacted gravel for drainage.
- Set the bunny on the gravel and check it is level from front to back and side to side.
- Backfill with soil or gravel, tamping as you go, and water lightly to settle it.
Step 4: Plant and Style Around It
Surround the bunny with plants that soften its edges. Low, mounding perennials such as catmint or lamb’s ear work well, as do ferns in shadier beds. Avoid planting tall, floppy grasses that will hide the figure. A small mulch ring of pine bark or shredded hardwood keeps the base tidy and reduces splashback of soil onto the concrete.
Quick Checklist
- Measure the planting area and choose a height about one-third of the surrounding plant mass.
- Confirm the sightline from your main viewing point.
- Prepare a base with gravel for drainage.
- Check level before backfilling.
- Plan a seasonal cleaning routine.
Common Mistakes
- Choosing a piece that is too small to register from the path.
- Setting the statue directly on soil, which lets it sink or tilt.
- Letting moss build up in shaded corners.
- Skipping the level check, which makes the figure look off-kilter.
- Placing it where mowers or sprinklers will strike it.
Recommended Gear
- Stiff-bristle outdoor scrub brush: helps remove algae and grime without scratching the concrete surface. View on Amazon
- Bubble or torpedo level: lets you check the statue’s base before backfilling. View on Amazon
- Pea gravel for drainage: creates a stable, well-draining base under the statue. View on Amazon
For more ideas on placement and styling, see Outdoor Garden Decor Statue Guide: How to Choose and Place One and Garden Statues. If you are also considering water features nearby, Outdoor Garden Statue Fountain: A Designer's Step-by-Step Guide walks through combining the two.
FAQ
Can concrete bunny statues stay outside all year?
Yes, most concrete garden statues are designed for outdoor use in all seasons. Check the manufacturer’s care notes, and avoid letting water pool on the figure, since repeated freeze-thaw cycles can cause surface cracks over time.
How do I clean a concrete bunny statue?
Rinse the statue with a garden hose and scrub gently with a stiff brush and mild soapy water. Rinse thoroughly and let it dry. Avoid harsh chemicals that can damage the surface or nearby plants.
Should I seal my concrete garden statue?
Sealing is optional and depends on the finish and your climate. Some owners apply a masonry sealer to reduce staining, but check product instructions and consult a landscape professional if you are unsure which product suits your statue.
Conclusion
A well-sized concrete bunny, set on a stable base and framed by low plantings, can become a charming focal point in any yard. Take time to test the sightline, level the piece carefully and plan a simple cleaning routine. With those steps, your statue will look settled and intentional for many seasons.

