Updated November 2026

Landscaping ideas along a fence can turn a plain boundary into a layered planting bed that adds privacy, color and depth. This guide walks you through measuring the strip, choosing plants by height and sun exposure, and arranging them in a layout that looks intentional from the house and from the yard. You will finish with a planting plan you can sketch on graph paper and build in a weekend.

Measure the Strip and Check the Conditions

Start by measuring the depth of the bed from the fence face to the lawn edge, and the length of the run. A bed under 18 inches deep suits low perennials, groundcovers and slim shrubs. Beds 3 feet or deeper can hold a row of taller shrubs or small trees. Note which side of the fence faces south or west, since those sections get the most sun. Also check for slope, because water tends to collect at the base of a fence on a flat grade and run downhill on a slope.

Shopping for one? See our guide: 9 Best Landscaping Ideas Big Backyard Picks for Every Style (2026).

Plan Layers by Height

Fence landscaping works best in three layers. Place the tallest plants at the back against the fence, the mid-height plants in the middle, and groundcovers or low edging at the front. Keep the tallest plants at least 2 to 3 feet from the fence so they have room to grow and air can move around them. Repeat groupings of three or five plants instead of scattering single specimens, which gives the bed a calmer, more designed look.

Match Plants to Light

Sun and shade decide most of your choices. Full sun beds suit lavender, catmint, daylilies and ornamental grasses. Part shade favors hydrangea, hellebores and astilbe. Deep shade calls for ferns, hosta and sweet woodruff. Check the plant tag for the sun requirement and the mature height, since the spacing on the tag matters more than how the nursery pot looks.

Seven Layouts to Consider

  1. Evergreen screen with perennial front. Upright evergreens such as arborvitae at the back, with a border of perennial geraniums in front.
  2. Flowering shrub line. A row of spaced shrubs like compact hydrangea or spirea, underplanted with hardy groundcover.
  3. Ornamental grass border. Clumps of feather reed grass or dwarf fountain grass in a repeated rhythm, with a mulch path.
  4. Cottage mix. Tall foxglove and delphinium at the back, roses or peonies in the middle, and catmint along the edge.
  5. Japanese-inspired strip. Clipped boxwood or dwarf pines, a few river stones and a band of mondo grass for a quiet, structured look.
  6. Modern linear bed. A single species repeated in a straight line, such as a row of one grass variety, edged with steel or stone.
  7. Shade garden strip. Ferns and hosta at the back and front with a path of shredded bark, suited to north-facing fences.

Build the Bed Step by Step

  1. Mark the bed outline with a garden hose or spray paint.
  2. Remove grass and weeds, and loosen the soil to a depth of 8 to 10 inches.
  3. Mix in 2 to 3 inches of compost, then rake the surface level.
  4. Place plants in their pots on the soil first, and adjust spacing before planting.
  5. Plant at the same depth as the nursery pot and water deeply.
  6. Apply 2 to 3 inches of mulch, keeping it a few inches away from stems.

Common Mistakes and Tips

  • Planting too close to the fence, which blocks airflow and traps moisture.
  • Choosing plants by their size at purchase rather than their mature height.
  • Skipping a path, which makes it hard to trim and reach the fence on the back side.
  • Ignoring drainage at the base of the fence; a shallow swale can help.
  • Overplanting in the first season. Leave room for growth and fill gaps later.

For more layout ideas, see Landscaping Ideas for Backyard Fences: 7 Designer Ways to Soften Any Fence and Backyard Fence Line Landscaping Ideas: 7 Designer Layouts That Work. If your strip is narrow, Side Yard Landscaping Ideas: 7 Designer Layouts That Work covers similar spacing problems.

  • Edging spade. A flat-blade spade makes clean, straight bed lines along the fence and lawn. View on Amazon
  • Soaker hose. Delivers water at the root zone, which keeps foliage dry near the fence. View on Amazon
  • Shredded hardwood mulch. Holds moisture and suppresses weeds along the base of the fence. View on Amazon

FAQ

How far from a fence should I plant shrubs?

Plant shrubs at least 2 to 3 feet from the fence, or the mature spread of the plant, whichever is larger. This leaves room for airflow and for the plant to grow without pressing against the boards.

What plants work best along a shady fence?

Ferns, hosta, astilbe and sweet woodruff tolerate part to full shade. Check each plant’s light requirement before buying. You may also like Landscaping Against a Fence Ideas: 6 Designer Layouts That Work.

Can I plant right up against a vinyl or wood fence?

Keep plants a few inches away at minimum so the fence can be maintained and the base stays dry. Vines are the exception and need a trellis or support.

Conclusion

Good landscaping along a fence depends on measuring the strip, layering plants by height and matching them to the light. Pick one of the seven layouts, sketch the bed and build it in stages. A well-planned border will soften the fence and add color for years.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our garden design & decor guides, checking product details against manufacturer specifications and owner feedback.