Updated November 2026
House frontage landscaping ideas work best when they start with the building itself. Good front yards frame the entrance, soften the foundation and give the house a clear focal point from the street. This guide walks through how to read your frontage, choose a layout and plant it so it looks finished from the first season.
Start by Reading Your Frontage
Before choosing plants, measure and observe. Note the width of the frontage, the distance from the front wall to the walk or curb, and which areas get full sun, afternoon shade or heavy foot traffic. Look at the roofline too. Overhangs and downspouts determine where water drops, and that affects which plants will survive near the foundation.
Shopping for one? See our guide: 9 Best Landscaping Ideas Big Backyard Picks for Every Style (2026).
A simple sketch on graph paper, with the house, walkway, driveway and any existing trees drawn to scale, makes the next decisions much easier. Designers often use a one-foot grid for this step.
Choose a Layout That Matches Your House Style
The architecture should guide the planting. A few common approaches work well:
- Symmetrical foundation planting: Matching shrubs on both sides of the entry suit colonial, Georgian and classic ranch homes.
- Layered cottage border: A curving bed of perennials, grasses and low shrubs suits bungalows and farmhouse designs.
- Clean modern strip: Repeated grasses or boxwood in linear beds, with gravel or pavers, suits contemporary facades.
If you are working on a narrow frontage, the principles shift. See Tiny Front Yard Landscaping Ideas: 7 Designer Layouts That Work for compact arrangements that keep the entrance open.
Plant in Layers and Keep Heights in Scale
Plant tallest material at the back or the corners of the house, with medium shrubs in front and low groundcover at the edge of the bed. As a rough guide, keep shrubs within about one-third of the height of the wall they sit against. Oversized plants bury windows and make small houses look crowded.
Leave room for mature size. Read the spacing on plant tags and place shrubs at least their expected width from the foundation. Repeat two or three plant types across the frontage rather than using a dozen different ones; repetition looks deliberate.
Add Structure with Edging and Mulch
Crisp edges make a planting bed look intentional. A steel or stone edge, or a clean-cut spade line, separates beds from lawn. Apply two to three inches of shredded bark or mulch, pulling it back a few inches from stems and siding to prevent rot.
Frontage Planning Checklist
- Measure the frontage and sketch the house, walks and existing features.
- Note sun exposure and drainage from downspouts and the roof edge.
- Pick one layout style that suits the architecture.
- Select two to three repeated plant types, sized for mature height and width.
- Plant in layers, edge the beds and mulch.
- Add lighting and a focal point, such as a container pair beside the door.
Common Mistakes to Avoid
- Planting too close to the foundation, which traps moisture and blocks airflow.
- Choosing too many different plants, which makes the frontage look busy.
- Ignoring evergreen versus deciduous balance, leaving the house bare in winter.
- Skipping a path to the door, so visitors walk through beds.
- Forgetting nighttime appearance; a few low lights along the walk change the look after dark.
Recommended Gear
A sturdy edging tool helps you cut clean, straight lines along walks and beds, which is the fastest way to make a frontage look finished. View on Amazon
A soil test kit lets you check pH before planting, so shrubs and perennials get conditions they like. View on Amazon
Solar path lights set along the walk extend the look into the evening without new wiring. View on Amazon
FAQ
How much space should I leave between plants and the house?
Plant shrubs at least their mature width away from the foundation, often two to three feet for medium shrubs. This keeps air moving and reduces moisture against siding.
What is the easiest way to make a plain frontage look better?
Define clean edges, repeat two or three plant types and add mulch. These three steps usually create more visual impact than adding many new plants.
Should I consult a professional before major changes?
If you plan to change grading, drainage or install retaining walls near the house, consult a licensed landscape contractor or civil engineer first to avoid water problems.
Conclusion
Strong house frontage landscaping starts with measuring and observing, then choosing a layout that suits the architecture. Plant in layers, repeat a few species and keep sizes in scale with the house. Once the bones are in place, mulch, edging and lighting finish the look.

